Skylight leaks
Water around a roof window
Drip edge is the L-shaped metal at the eaves and rakes that throws water clear of the fascia and into the gutter. Without it, water tracks back along the underside of the shingle edge and runs down the fascia board, which is the single most common reason fascia rots. It is inexpensive, it is required by most current codes, and it is routinely missing on older roofs — so it is worth checking whenever fascia or gutter work is being done.
Union Point sits in Georgia's hail belt, where the spring storm line coming across the state tends to organise. Hail is the dominant roof killer here and it works slowly: the stone bruises the asphalt mat under the granule surface without breaking through, so the roof keeps water out for another season or two and then starts leaking from spots that were damaged years earlier. Add the summer heat load — Greene County roofs run extremely hot, which ages the shingle and dries out the sealant around every penetration — and the failures cluster around pipe boots, flashing and anything with a rubber component.
Union Point has a population of about 1,597, and the housing stock here sets the pattern for what fails first on a roof.
It is why the fascia rots. Water clings to the underside of the shingle edge and tracks back onto the timber instead of dropping into the gutter. Retrofitting it is cheap compared with replacing fascia repeatedly.
At the eaves it can often be slid under the first shingle course. At the rakes it needs to go under the underlayment, which usually means lifting the edge courses. Both are localised jobs.
Water around a roof window
Where two roof slopes meet
Leaks appearing after wind or hail
Concrete and clay tile
Crown, cap and masonry
Bruising and granule loss
You will get a straight answer on whether Union Point needs someone out today or whether it can wait — before anyone quotes you for anything.
Call (229) 592-0097